Anodized aluminum platforms provide clamping between our Series 20 chambers and their bottom glass coverslips to create a water tight seal.
The Series 20 Platforms function as a base for the Series 20 Imaging and Recording Chambers and provides the clamping needed to make a seal between a chamber and its bottom glass coverslip.
Platforms are machined from aluminum and finished with a black anodize. This provides excellent heat conductivity and minimizes stray light reflectance. Sliding clamps used on most models permit easy removal of the chamber to change its coverslip. The P-2 Platform uses a one piece clamp secured with 4 screws, while all other models use two clamps with 2 screws each (i.e. 4 total).
Platforms can be ordered plain or with resistive heaters. Heater platforms have a pair of 10 ohm resistive elements attached. Control of platform heating is provided by one of our temperature controllers (e.g., TC-344C or TC-324C). Connection to the power source can be made using a cable assembly (e.g. CC-28).
Information on the proper placement of the feedback resistor in the platform body can be found here.
NOTE: Warner Instrument Series P or PH platforms are designed to fit the Zeiss 76x26 microscope slide frame (#471719) without the use of a stage adapter. Series PM platforms require a stage adapter. In general, all heater platforms will benefit from an insulating material between the platform and frame.
Platform Dimensions
Click to enlarge
Chamber/Platform look-up table
Our selections update continually, please call our offices if you don't see your specific chamber below.
Imaging or Recording Chamber |
Central Aperture |
Platform |
Platform image |
---|---|---|---|
17.8 mm |
PH-1 |
||
17.5 mm |
PH-2 |
||
9.5 mm |
PH-3 |
||
13.0 mm |
PH-4 |
||
12.0 mm |
PH-5 |
||
18.9 x 35.6 mm |
PH-6 |
||
18.9 x 35.6 mm |
PH-6D |
|
Customers from Europe and Australia can use the Multi Channel Systems - Online Shop to order Warner products or create quotes.
Order No. | Model No. | Product Description | USA Price | Order |
---|---|---|---|---|
Platforms With Heating Elements | ||||
64-0284 | PH-1 | PH-1 Platform for Series 20 chambers, heater | Login | Login |
64-0285 | PH-2 | PH-2 Platform for Series 20 chambers, heater | Login | Login |
64-0286 | PH-3 | PH-3 Platform for Series 20 chambers, heater | Login | Login |
64-0287 | PH-4 | PH-4 Platform for Series 20 chambers, heater | Login | Login |
64-0288 | PH-5 | PH-5 Platform for Series 20 chambers, heater | Login | Login |
64-0289 | PH-6 | PH-6 Platform for Series 20 chambers, heater | Login | Login |
64-0290 | PH-6D | PH-6D Platform for Series 20 chambers, heater | Login | Login |
Temperature Controllers | ||||
64-2401 | TC-344C | Heater controller, dual channel, 110-230 VAC, 50/60Hz | Login | Login |
64-2400 | TC-324C | Heater controller, single channel, 110-230 VAC, 50/60Hz | Login | Login |
Temperature Control Accessories | ||||
64-0106 | CC-28 | Cable assembly for heater controllers to platform | Login | Login |
64-0107 | TA-29 | Cable with bead thermistor | Login | Login |
64-1427 | ACC-1 | Adapter cable to connect CL-100/CL-200A to 8 pin DIN heaters | Login | Login |
Replacement Parts | ||||
64-0274 | RH-2 | Heater elements for Warner chambers and platforms, 2 pack | Login | Login |